2,947 research outputs found

    Gestalt Theory in Visual Screen Design — A New Look at an old subject

    Get PDF
    Although often presented as a single basis for educational visual screen design, Gestalt theory is not a single small set of visual principles uniformly applied by all designers. In fact, it appears that instructional visual design literature often deals with only a small set of Gestalt laws. In this project Gestalt literature was consulted to distil the most relevant Gestalt laws for educational visual screen design. Eleven laws were identified. They deal with balance/symmetry, continuation, closure, figure-ground, focal point, isomorphic correspondence, prŠgnanz, proximity, similarity, simplicity, and unity/harmony. To test the usefulness of these laws in visual screen design they were applied to the redesign of an instructional multimedia application, 'WoundCare', designed to teach nursing students wound management. The basic text-based screens in the original WoundCare application were replaced with graphical user interface screens, that were designed according to these principles. The new screen designs were then evaluated by asking students and others to compare the designs. The viewers were also asked to rate directly the value of using the eleven Gestalt design principles in the redesign, both for improving the product's appearance and improving its value for learning. The evaluation results were overwhelmingly positive. Both the new design and the value of applying the eleven Gestalt laws to improve learning were strongly supported by the students' opinions. However, some differences in the value of applying particular Gestalt laws to the interface design were identified and this forms a useful direction for future research

    Regional Eradication of Mycoplasma hyopneumoniae From Pig Herds and Documentation of Freedom of the Disease

    Get PDF
    The objectives of this study were to 1) screen all sow herds in a region for M. hyopneumoniae, 2) to effectuate an eradication programme in all those herds which were shown to be infected with M. hyopneumoniae, and 3) to follow the success of the screening and the eradication programmes. The ultimate goal was to eradicate M. hyopneumoniae from all member herds of a cooperative slaughterhouse (153 farrowing herds + 85 farrowing-to-finishing herds + 150 specialised finishing herds) before year 2000. During 1998 and 1999, a total of 5067 colostral whey and 755 serum samples (mean, 25 samples/herd) were collected from sow herds and analysed for antibodies to M. hyopneumoniae by ELISA. Antibodies were detected in 208 (3.6%) samples. Two farrowing herds (1.3%) and 20 farrowing-to-finishing herds (23.5%) were shown to be infected with M. hyopneumoniae. A programme to eradicate the infection from these herds was undertaken. During March 2000, a survey was made to prove the success of the screening and the eradication programmes. In total, 509 serum samples were collected randomly from slaughtered finishing pigs. Antibodies to M. hyopneumoniae were not detected in 506 of the samples, whereas 3 samples were considered suspicious or positive. Accordingly, 3 herds were shown to be infected. One of the herds was previously falsely classified as non-infected. Two of the herds were finishing herds practising continuous flow system (CF). Unlike finishing herds which practice all-in/all-out management routines on herd level, CF herds do not get rid of transmissible diseases spontaneously between batches, for which reason a screening was made in the rest of the CF herds (total n = 7). Consequently, 2 more infected herds were detected. In addition to the results of the survey, a decreasing prevalence of lung lesions at slaughter (from 5.2% to 0.1%) and lack of clinical breakdowns indicated that all member herds were finally free from M. hyopneumoniae in the end of year 2000

    Processing and Interconnections of Finely Segmented Semiconductor Pixel Detectors for Applications in Particle Physics and Photon Detection

    Get PDF
    Radiation hardness is in the focus of the development of particle tracking and photon imaging detector installations. Semiconductor detectors, widely used in particle physics experiments, have turned into capacitive-coupled (AC-coupled) detectors from the originally developed conductively coupled (DC-coupled) detectors. This is due to the superior isolation of radiation-induced leakage current in AC-coupled detectors. However, some modern detector systems, such as the tracking detectors in the CERN LHC CMS or ATLAS experiments, are still DC-coupled. This originates from the difficulty of implementing AC coupling on very small pixel detector areas. In this report, we describe our advances in the detector processing technology. The first topic is the applications of the atomic layer deposition processing technology, which enables the very high densities of capacitance and resistance that are needed when the dimensions of the physical segmentation of pixel detectors need to be scaled down. The second topic is the flip-chip/bump-bonding interconnection technology, which is necessary in order to manufacture pixel detector modules on a large scale with a more than 99% yield of noise-free and faultless pixels and detector channels.Peer reviewe

    Novel Data Acquisition System for Silicon Tracking Detectors

    Full text link
    We have developed a novel data acquisition system for measuring tracking parameters of a silicon detector in a particle beam. The system is based on a commercial Analog-to-Digital VME module and a PC Linux based Data Acquisition System. This DAQ is realized with C++ code using object-oriented techniques. Track parameters for the beam particles were reconstructed using off-line analysis code and automatic detector position alignment algorithm. The new DAQ was used to test novel Czochralski type silicon detectors. The important silicon detector parameters, including signal size distributions and signal to noise distributions, were successfully extracted from the detector under study. The efficiency of the detector was measured to be 95 %, the resolution about 10 micrometers, and the signal to noise ratio about 10.Comment: Talk from the 2003 Computing in High Energy and Nuclear Physics (CHEP03), La Jolla, Ca, USA, March 2003, 6 pages, LaTeX, 5 eps figures. PSN TUGP00

    Planck-LFI radiometers' spectral response

    Get PDF
    The Low Frequency Instrument (LFI) is an array of pseudo-correlation radiometers on board the Planck satellite, the ESA mission dedicated to precision measurements of the Cosmic Microwave Background. The LFI covers three bands centred at 30, 44 and 70 GHz, with a goal bandwidth of 20% of the central frequency. The characterization of the broadband frequency response of each radiometer is necessary to understand and correct for systematic effects, particularly those related to foreground residuals and polarization measurements. In this paper we present the measured band shape of all the LFI channels and discuss the methods adopted for their estimation. The spectral characterization of each radiometer was obtained by combining the measured spectral response of individual units through a dedicated RF model of the LFI receiver scheme. As a consistency check, we also attempted end-to-end spectral measurements of the integrated radiometer chain in a cryogenic chamber. However, due to systematic effects in the measurement setup, only qualitative results were obtained from these tests. The measured LFI bandpasses exhibit a moderate level of ripple, compatible with the instrument scientific requirements.Comment: 16 pages, 9 figures, this paper is part of the Prelaunch status LFI papers published on JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/jins
    corecore